Fuse Holders & Blocks
Fuse Holder for 3AG Fuses
Screw cap fuse holder rated at 15A @ 250VAC. Holds 1/4" x 1 1/4" fuses. Can be used in panels up to 1/4" thick. Mounts in 19/32" hole.
$4.29
Fuse Holder for ATC/ATO Type Fuses
ATC/ATO Fuse HolderWeather resistantNylon body with latching capRubber seal protects fuses12AWG, 3 to 30 Amp
$2.99
Fuse Block, 6 Circuit, 10 AWG Lead
ATC Auxiliary Fuse BlockThis fuse block has a pre-terminated 23" long input wire, to make the installation easier. It allows for 6 separate fuse circuits to be connected using ATC type blade fuses. It has elevated mounting legs to prevent...
$16.99
Fuse & Ground Block, 6 Position, ATC fuses
6-Way Fuse Block with Integrated Ground Block & Cover Includes: Fuse Block Cover Sticker Sheet to Label Fuse Postions Self Tapping Screws x 4 ATC/ATO Fuses (4x 20A, 4x 15A, 2x 10A, 2x 5A) Specifications: Input Maximum Rated Voltage: 32VDC...
$24.99
Fuse & Ground Block, 12 Position, ATC fuses
12-Way Fuse Block with Integrated Ground Block & Cover Includes: Fuse Block Cover Sticker Sheet to Label Fuse Postions Self Tapping Screws x 4 ATC/ATO Fuses (6x 20A, 6x 15A, 6x 10A, 6x 5A) Specifications: Input Maximum Rated Voltage: 32VDC...
$29.99
FUSE BLOCK 6 POS ATC TYPE WITH COVER
Marine Rated Fuse Block with Cover 6 Circuit
6 Fused Circuits
Uses ATC/ATO Type Fuses
30 Amp per Circuit
100 Amp per Fuse Block
Fuses NOT Included
Product Manufacturer: BlueSea
$45.35
ATC Type Fuse Block W/Cover 12 Position
Consolidates branch circuits and in-line fuses Positive distribution bus with #10-32 stud Can be used for 24-hour circuits Models available with or without a cover Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing...
$51.49
Add-A-Circuit Plug-In Fuse Tap, Holds ATM Mini Fuses
Add-A-CircuitPlug into an existing fuse block - provides one fuse to protect the original ciruitUse wire lead for new circuit - second fuse protects new circuitRed 16 AWG wire - #16-14 AWG butt connector - 10 Amp at 12V
$4.99
Add-A-Circuit Plug-In Fuse Tap, Holds ATC/ATO Fuses
Add-A-CircuitPlug into an existing fuse block - provides one fuse to protect the original ciruitUse wire lead for new circuit - second fuse protects new circuitRed 16 AWG wire - #16-14 AWG butt connector - 10 Amp at 12V
$5.59
Inline Fuseholder, MAXI Blade Type, 8 AWG
Fuse Holder - InlineThese fuse holder are made to fit a Maxi type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$4.49
Inline Fuseholder, ATC/ATO Blade Type, 10 AWG
Fuse Holder - InlineThese fuse holder are made to fit a ATC/ATO type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$2.69
Inline Fuseholder, ATC/ATO Blade Type, 18 AWG
Fuse Holder - InlineThese fuse holder are made to fit a ATC/ATO type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$1.69
Inline Fuseholder, ATC/ATO Blade Type, 12 AWG
Fuse Holder - InlineThese fuse holder are made to fit a ATC/ATO type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$1.99
Inline Fuseholder, ATC/ATO Blade Type, 14 AWG
Fuse Holder - InlineThese fuse holder are made to fit a ATC/ATO type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$1.79
Inline Fuseholder, ATC/ATO Blade Type, 16 AWG
Fuse Holder - InlineThese fuse holder are made to fit a ATC/ATO type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$1.49
Inline Fuseholder, ATM Mini Blade Type, 12 AWG
Fuse Holder - InlineThese fuse holder are made to fit a ATM type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$1.99
Inline Fuseholder, ATM Mini Blade Type, 16 AWG
Fuse Holder - InlineThese fuse holder are made to fit a ATM type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$1.79
Inline Fuseholder, 3AB/3AG Type, 14 AWG
Fuse Holder - InlineThese fuse holder are made to fit a 3AG / 3AB type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. 14...
$1.99
Inline Fuseholder, 3AB/3AG, 18 AWG
Fuse Holder - InlineThese fuse holder are made to fit a 3AG / 3AB type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. 18...
$1.19
Inline Fuseholder for 8 / 4 AWG Wire
Fuse HolderThis inline fuse holder can be surface mounted and accepts AGU type fuses up to 80A Specifications:
Max Wire Size: 4 AWG (8 AWG with Reducers)
Max Amperage: 80A
Connections: Hex Set Screw
$7.99
ATC/ATO Fuse Tap, 4 pack
ATC/ATO Fuse Taps, 4 packBrass .250" Male TabSnaps over Blade FusesFuse not included
$2.99
Add-A-Circuit Plug-In Fuse Tap, Holds Low Profile Fuses
Add-A-CircuitPlug into an existing fuse block - provides one fuse to protect the original ciruitUse wire lead for new circuit - second fuse protects new circuitRed 16 AWG wire - #16-14 AWG butt connector - 10 Amp at 12V
$4.79
Add-A-Circuit Plug-In Fuse Tap, Holds ATM Mini Fuses
Add-A-CircuitPlug into an existing fuse block - provides one fuse to protect the original ciruitUse wire lead for new circuit - second fuse protects new circuitRed 16 AWG wire - #16-14 AWG butt connector - 10 Amp at 12V
$3.99
Add-A-Circuit Plug-In Fuse Tap, Holds ATC/ATO Fuses
Add-A-CircuitPlug into an existing fuse block - provides one fuse to protect the original ciruitUse wire lead for new circuit - second fuse protects new circuitRed 16 AWG wire - #16-14 AWG butt connector - 10 Amp at 12V
$3.99
Add-A-Circuit Plug-In Fuse Tap, Holds Micro 2 Fuses
Add-A-CircuitPlug into an existing fuse block - provides one fuse to protect the original ciruitUse wire lead for new circuit - second fuse protects new circuitRed 16 AWG wire - #16-14 AWG butt connector - 10 Amp at 12V
$3.89
In-Line Fuse Holder, AGC Type, #16AWG
In-Line fuse holder with universal nylon body for AGE and JSO glass fuses. Black #16AWG wire, 15 amp.
$1.69
Miniature Push Button Circuit Breaker, 15A
Miniature Circuit BreakerThis is a push-to-reset style panel mount circuit breaker for protecting electronic equipment.Specifications: Standard Rating: 15 amps Input Power: 125VAC | 250VAC Dielectric Strength: 1500VAC for 1 minute Interupt Capacity: 1000 amps 125VAC/250VAC Insulation Resistance: > 100 Meg...
$5.79
Crankin' Power In-Line ANL Fuse Holder, up to 1/0 AWG
Crankin' Power In-Line ANL Fuse Holder, up to 1/0 AWG
$24.95
ATC Type Fuse Block With Cover 6 Circuit With Cover
ATC Type Fuse Block With Cover 6 Circuit With Cover6 Circuits Uses ATC Type Fuses15 Amp per Circuit MAXIMUM.250" Tab TerminalsWater Resistant Cover with Rubber SealFuses NOT IncludedProduct Manufacturer: K-Four
$13.69
ATC Type Fuse Block With Cover (4 Circuit)
ATC Type Fuse Block With Cover 4 Circuit With Cover4 Circuits Uses ATC Type Fuses15 Amp per Circuit MAXIMUM.250" Tab TerminalsWater Resistant Cover with Rubber SealFuses NOT IncludedProduct Manufacturer: K-Four
$12.99
ATC Type Fuse Block W/O Ground, 12 Position
Marine Rated Fuse Block with Cover 12 Circuit
12 Fused Circuits
Uses ATC/ATO Type Fuses
30 Amp per Circuit
100 Amp per Fuse Block
Fuses NOT Included
Product Manufacturer: BlueSea
$55.92
ATC Type Fuse Block W/Cover 12 Position
Marine Rated Fuse Block with Cover 12 Circuit
12 Fused Circuits plus 12 Position Ground Terminal
Uses ATC/ATO Type Fuses
30 Amp per Circuit
100 Amp per Fuse Block
Fuses NOT Included
Product Manufacturer: BlueSea
$60.47
ATC Type Fuse Block W/Ground, 6 Position
Marine Rated Fuse Block with Cover 6 Circuit
6 Fused Circuits + 6 Position Ground Terminal
Uses ATC/ATO Type Fuses
30 Amp per Circuit
100 Amp per Fuse Block
Fuses NOT Included
Product Manufacturer: BlueSea
$49.27
Pre-Wired Bakelite Fuse Holder, 8 AWG
Fuse Holder - InlineThese fuse holders are made to fit a AGU type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. 8 AWG Wire...
$4.99
Melamine Tube Fast-Acting Fuse, 20A 600V
10 x 38 mm Ceramic Fast Acting Fuse, KTK EquivalentPhotovoltaio/Solar Power Fuses Specifications: Rated Amperage: 20A Fuse Filament Type: Fact Acting Rated Voltage: 1000V, 690V Time Current Characteristics: 100% of Capacity: 4 hours min.400% of Capacity: 0.01 - 10 seconds1000%...
$12.56